Skip to content

Hardware

Start here to look up chip specifications, wire up the IPRO7AI Reef EVK, map pins or measure current. Every step and example on this site targets the IPRO7AI Reef EVK V4.0.

Chips

  • IPRO7

    RISC-V RV32IMAFC, BLE 5.4 with LE Audio, IEEE 802.15.4, ISP and hardware MJPEG; the target of 37 applications in this release.

  • IPRO7AI

    The IPRO7 variant with the NPU enabled and 8 MB of PSRAM in the package; the main chip of the Reef EVK.

  • IPRO6S

    RISC-V SoC with built-in Wi-Fi 6. This release ships three IPRO6S Wi-Fi applications; on the Reef it is the FIN Wi-Fi card in the microSD slot.

Boards

  • IPRO7AI Reef EVK V4.0

    IPRO7AI (QFN56) board: OV5640 camera connector, PDM microphone, headset jack and speaker, microSD slot (takes the IPRO6S FIN card), RGB LED and a 40-pin expansion header; powered from USB-C only.

The SDK also has applications for the IPRO7 EVB, the IPRO7AI EVK, the IPRO6S EVK and the IPRO7 Arduino board; see Examples. Contact INTELPRO for these boards.

Pins and power

  • Pinout & Peripheral Mapping

    GPIO function select, UART / SPI / SDIO / I2S pins, the alternate-function tables and the Reef's default pins.

  • Power & Current Measurement

    How the Reef is powered, measuring the IPRO7AI's current with SW8 and JP2, and power design recommendations.