ipro7_jpeg_decode¶

ソフトウェア（TJpgDec）による JPEG から RGB565／RGB888 へのデコード。フォーマット判定、内蔵テスト画像、ホストツール付き。IPRO7 の MJPEG ブロックはエンコード専用です

Reef で動かす¶

Reef 構成の中で、コンソールが 921600 baud なのはこのアプリケーションだけです。

README¶

Decode a JPEG picture into RGB565 or RGB888 pixels on IPRO7 with a software decoder, and check the result.

IPRO7's MJPEG hardware block is supported for encoding only. hal_mjdec.h exists in the SDK, but on IPRO7 the decoder never completes a frame (no frame-done interrupt, no output), so JPEG pictures are decoded on the CPU, by TJpgDec R0.03 (BSD-style licence, see the header of tjpgd/tjpgd.c). The decoder sources are in tjpgd/ because the SDK release packages do not carry components/3rdparty/tjpgdec; tjpgd.c / tjpgd.h are that component's files unchanged, tjpgdcnf.h selects 24-bit output. To use it in your own project copy jdec_rgb.c, jdec_rgb.h and tjpgd/.

What the wrapper adds to TJpgDec¶

API¶

#include "jdec_rgb.h"

jdec_info_t info;
int err = jdec_probe(jpg, len, &info);            /* can it be decoded, how big is it? */
if (err != JDEC_OK) {
    printf("%s\r\n", jdec_strerror(err));
    return;
}
uint32_t size = jdec_out_size(&info, JDEC_RGB565, 0);   /* scale 0..3 = 1/1, 1/2, 1/4, 1/8 */
uint8_t *rgb  = pvPortMalloc(size);                     /* PSRAM when CONFIG_USE_PSRAM=y */
err = jdec_decode(jpg, len, JDEC_RGB565, 0, rgb, size, &info);

Formats: JDEC_RGB565 (uint16_t, R in bits 15..11, little-endian), JDEC_RGB565_BE (same value, high byte first, as SPI LCD controllers expect), JDEC_RGB888 (R, G, B bytes). For an LCD, jdec_decode_blocks() passes each decoded block (at most 16 x 16 pixels) to a callback, so no frame buffer is needed; a callback writing into its own buffer must keep x + w and y + h within jdec_out_dims(). The decoder allocates an 8 KB work area per call (16 KB with JD_FASTDECODE 2; typically 3.5 KB / 9.7 KB is used, 5.4 KB for a valid file at the format limits); the input JPEG can be anywhere the CPU can read, flash included. jdec_out_size() returns 0 when the picture cannot be decoded or needs 4 GB or more.

Accepted: baseline (SOF0) Huffman JPEG, grey or YCbCr 4:4:4 / 4:2:2 / 4:2:0, 8-bit tables, any size, EXIF / ICC / other APPn segments, restart markers, missing DHT. Rejected: progressive, other SOF types (extended, lossless, arithmetic), 12-bit, 4:1:1 / 4:4:0, CMYK / RGB-coded, 16-bit quantisation tables, files without EOI. host/jpeg_check.py photo.jpg [--fix out.jpg] checks a file on the PC and converts it if needed.

Build and flash¶

make -C apps/multimedia/ipro7_jpeg_decode                            # IPRO7AI EVK, console 921600
make -C apps/multimedia/ipro7_jpeg_decode DEFCONFIG=defconfig_reef   # IPRO7AI Reef (build_reef/)

Needs PSRAM (CONFIG_USE_PSRAM=y) for the output buffers. Image: 482 KB flash (360 KB of it test JPEGs), 41 KB OCRAM. With CMake 3.18 or later jdec_rgb.c and tjpgd/tjpgd.c are compiled at -O2 (about 1.9x faster than the SDK's -Os, same output); older CMake keeps -Os.

Shell¶

Checks on the built-in images: the output hash must equal that of the same decoder built on the PC (=host, bit-exact), and the RGB mean of every 16 x 16 block (64 x 64 above 640 pixels wide) must be within 10 of libjpeg.

Host tools (Python 3, pyserial, Pillow, numpy):

python3 host/jdec_host.py -p /dev/cu.usbmodemXXXX02 upload photo.jpg --go 565
python3 host/jdec_host.py -p /dev/cu.usbmodemXXXX02 dump rx --fmt 888 -o board.png --ref photo.jpg
python3 host/run_host_tests.py      # decoder + wrapper on the PC against libjpeg (needs cc, djpeg)
python3 host/make_test_jpegs.py     # regenerate test_images.c (needs cc, djpeg, jpegtran)

Results (IPRO7AI Reef, CPU 192 MHz, 2026-10-30)¶

jdec run all with 565, 888, 565be, and 565 / 888 in block mode: 14 / 14 PASS each; all 11 decodable images bit-exact with the PC build; 3 rejected with the expected reason (progressive, CMYK, truncated). Against libjpeg (RGB888, PC build): PSNR 44.7-45.3 dB on the test images (grey 49.6 dB); a 640 x 480 photo-like JPEG with EXIF + ICC sent over the console: 46.2 dB. With JD_FORMAT 1 (16-bit, as components/3rdparty/tjpgdec) RGB888 is expanded from 16 bits: 38.3-39.1 dB. host/run_host_tests.py runs on an AddressSanitizer + UndefinedBehaviorSanitizer build and decodes damaged copies of the test images; 1500 of them (3000 decodes) gave no memory error, and host/jpeg_check.py agreed with jdec_probe() on all. Stack: about 1 KB at peak (decode plus printf); heap back to the same value after each decode.

Decode time, output to PSRAM, code in flash:

-O2 applies with CMake 3.18 or later (see CMakeLists.txt). Block mode adds 3-4 %. JD_FASTDECODE 2 (16 KB work area) saved a further 5 % in a test with the 16-bit build; it is left at 1. -fwrapv keeps corrupt data from causing undefined behaviour in the decoder's integer IDCT (it costs 3-5 % on RGB888).