安全引擎¶

AES、GMAC、雜湊、DSA、ECDSA、P-256 與硬體亂數。說明取自標頭檔註解（英文）。

hal_sec_common.h¶

#include "hal_sec_common.h"（原始碼）

Security engine bring-up, SHA context layouts and the critical section used by the security-engine helpers.

Call hal_sec_common_init() once at start-up, before the random-number functions in hal_sec_trng.h are used.

The critical-section helpers hal_sec_enter_critical() and hal_sec_exit_critical() depend on the build. When CONFIG_FREERTOS or CONFIG_FREERTOS_SUPPORT is defined they use the FreeRTOS kernel critical section (taskENTER_CRITICAL() / taskEXIT_CRITICAL()), so this header then includes FreeRTOS.h and task.h. In any other build (bare metal, Zephyr) they save the global interrupt enable, disable interrupts and restore the saved state (__irq_save() / __irq_restore() from system_soc.h).

For hashing use the API in hal_sec_hash.h; no function in the SDK takes the SHA context types declared here.

hal_sec_common_init¶

int hal_sec_common_init(void);

Initialise the security-engine blocks the platform needs.

Currently this initialises the TRNG and is equivalent to hal_sec_trng_init(). The random-number functions in hal_sec_trng.h, and the Wi-Fi supplicant that draws its handshake nonces from them, require it.

回傳值：0 (the TRNG initialisation always reports success).

hal_sec_enter_critical¶

unsigned long hal_sec_enter_critical(void);

Enter the critical section that protects shared security-engine state.

FreeRTOS build: calls taskENTER_CRITICAL(), which masks interrupts up to the kernel's system-call priority and nests. Interrupts above that priority keep running.

回傳值：Value to pass to hal_sec_exit_critical() (always 0 in this build).

hal_sec_exit_critical¶

void hal_sec_exit_critical(unsigned long prev_level);

Leave the critical section entered with hal_sec_enter_critical().

FreeRTOS build: calls taskEXIT_CRITICAL().

hal_sha_type_t¶

Hash algorithm identifiers stored in the SHA context types below.

The hash API in hal_sec_hash.h uses enum sec_hash_type instead.

hal_SEC_Eng_SHA256_Link_Ctx¶

Link-mode running state for SHA-1, SHA-224 and SHA-256.

Same layout as the security-engine driver's SHA-256 link context.

hal_SEC_Eng_SHA_Link_Config_Type¶

Link configuration read by the SHA engine, used for every SHA variant.

hal_sha_ctx_t¶

Complete SHA-1/SHA-224/SHA-256 context with its working buffers.

hal_SEC_Eng_SHA512_Link_Ctx¶

Link-mode running state for SHA-384 and SHA-512.

Same layout as the security-engine driver's SHA-512 link context.

hal_sha512_ctx_t¶

Complete SHA-384/SHA-512 context with its working buffers.

hal_sec_hw_common.h¶

#include "hal_sec_hw_common.h"（原始碼）

Security-engine driver includes and capability flags shared by the security HAL sources.

Pulls in the GLB and security-engine driver headers (drv_glb.h, drv_sec_eng.h).

巨集¶

hal_sec_aes.h¶

#include "hal_sec_aes.h"（原始碼）

AES-128/192/256 in ECB, CBC and CTR mode on the security engine.

Typical sequence: sec_aes_init() or sec_aes_init_ex(), sec_aes_setkey(), one or more sec_aes_encrypt() / sec_aes_decrypt() calls, sec_aes_deinit().

Keys, IVs and counter blocks are plain byte arrays in the order defined by FIPS-197 and SP 800-38A (byte 0 first); the HAL programs the engine in big-endian mode. Data is processed in 16-byte blocks.

All calls are blocking: the CPU polls the engine until the operation ends. The HAL takes no lock and every handle drives the same AES engine, so callers in different tasks must serialise their use of it.

sec_aes_init¶

int sec_aes_init(sec_aes_handle_t *handle, sec_aes_type aes_type, sec_aes_key_type key_type);

Initialise an AES handle in link mode.

Same as sec_aes_init_ex() with SEC_MODE_LINK.

sec_aes_init_ex¶

int sec_aes_init_ex(sec_aes_handle_t *handle, sec_mode_t mode, sec_aes_type aes_type, sec_aes_key_type key_type);

Initialise an AES handle in the given operation mode.

Direct mode switches the engine out of link mode. Link mode clears the handle's link configuration and stores the cipher mode and key length in it. No key is loaded yet; call sec_aes_setkey() next.

sec_aes_setkey¶

int sec_aes_setkey(sec_aes_handle_t *handle, const uint8_t *key, uint8_t key_len, const uint8_t *nonce, uint8_t dir);

Load the key and IV and select the direction.

The direction chosen here applies to every following sec_aes_encrypt() and sec_aes_decrypt() call on the handle.

sec_aes_encrypt¶

int sec_aes_encrypt(sec_aes_handle_t *handle, const uint8_t *in, uint32_t len, size_t offset, uint8_t *out);

Run the AES operation on len bytes.

Despite its name this runs the direction selected with sec_aes_setkey(); sec_aes_encrypt() and sec_aes_decrypt() perform the same operation.

The HAL cleans the data cache over in and cleans and invalidates it over out before and after the engine's DMA, so both buffers may be cacheable. Prefer an out buffer aligned to the 32-byte cache line and a len that covers whole lines: data that shares a cache line with out and is written by another task or an interrupt during the call can be lost.

sec_aes_decrypt¶

int sec_aes_decrypt(sec_aes_handle_t *handle, const uint8_t *in, uint32_t len, size_t offset, uint8_t *out);

Run the AES operation on len bytes.

Identical to sec_aes_encrypt(): the direction is the one selected with sec_aes_setkey(), not the function name.

sec_aes_deinit¶

int sec_aes_deinit(sec_aes_handle_t *handle);

Release an AES handle.

In direct mode the engine's enable, key-select and IV-select bits are cleared. The whole handle, including any key copy, is then zeroed.

sec_mode_t¶

Security engine operation mode.

sec_aes_type¶

AES block cipher mode.

sec_aes_key_type¶

AES key length.

sec_aes_dir_type¶

AES direction.

sec_aes_handle_t¶

AES handle for both direct and link mode.

The caller provides the storage (static or stack); the HAL keeps no pointer to it between calls. In link mode the HAL accesses link_cfg through its non-cacheable alias (hal_get_noncacheable_addr()), so the handle itself may live in cacheable RAM.

Layout: offset 0 holds mode/aes_type/key_type/dir (16 bytes, CPU-only), offset 16 holds 48 bytes of padding (guard0) and link_cfg starts at offset 64. Place the handle on a 64-byte boundary (for example with __attribute__((aligned(64)))) so that link_cfg never shares a cache line with the CPU-written fields.

hal_sec_gmac.h¶

#include "hal_sec_gmac.h"（原始碼）

GHASH (the GF(2^128) hash used by AES-GCM and GMAC) on the security engine.

The engine computes GHASH with a 16-byte hash subkey H; for AES-GCM, H = AES-K(0^128), which the caller computes (for example with hal_sec_aes.h in ECB mode). Typical sequence: sec_gmac_init() once, sec_gmac_start(), sec_gmac_clear(), sec_gmac_update() for the AAD, the ciphertext and finally the 16-byte length block, sec_gmac_finish(), sec_gmac_deinit(). The caller XORs the result with E(K, J0) to form a GCM tag. All byte strings are in GCM order (byte 0 first).

Calls are blocking (the CPU polls the engine). The HAL takes no lock; callers in different tasks must serialise their use of the engine.

sec_gmac_init¶

int sec_gmac_init(void);

Put the GHASH engine in big-endian link mode.

Call once before any other function in this file. Calling it again is harmless.

回傳值：0 (always).

sec_gmac_start¶

int sec_gmac_start(sec_gmac_handle_t *handle, const uint8_t key[16]);

Clear a handle and load the hash subkey.

The running GHASH value is cleared as well.

sec_gmac_clear¶

int sec_gmac_clear(sec_gmac_handle_t *handle);

Reset the running GHASH value to zero, keeping the hash subkey.

Use it to start a new message with the same subkey.

sec_gmac_update¶

int sec_gmac_update(sec_gmac_handle_t *handle, const uint8_t *input, uint32_t input_len);

Absorb data into the running GHASH value.

Whole 16-byte blocks are processed directly from input; a trailing partial block is zero-padded to 16 bytes and processed too. Because of this padding only the last update of each GCM field (AAD or ciphertext) may have a length that is not a multiple of 16.

The HAL cleans the data cache over input, so it may be cacheable.

sec_gmac_finish¶

int sec_gmac_finish(sec_gmac_handle_t *handle, uint8_t result[16]);

Read the running GHASH value.

The value is copied as is; append the GCM length block with sec_gmac_update() before calling this. The handle is not changed.

sec_gmac_deinit¶

int sec_gmac_deinit(sec_gmac_handle_t *handle);

Erase a handle's link configuration, including the hash subkey.

sec_gmac_handle_t¶

GHASH handle (link mode only).

The caller provides the storage. The HAL accesses link_cfg and tmp_buf through their non-cacheable aliases (hal_get_noncacheable_addr()), so the handle may live in cacheable RAM; place it on a 32-byte boundary so that link_cfg does not share a cache line with other data.

hal_sec_hash.h¶

#include "hal_sec_hash.h"（原始碼）

SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 on the security engine.

Typical sequence: sec_hash_init() or sec_hash_init_ex(), any number of sec_hash_update() calls, sec_hash_finish(), sec_hash_deinit(). The digest is written in the standard FIPS 180-4 byte order.

Calls are blocking (the CPU polls the engine). The HAL takes no lock and all handles use the same SHA engine, so callers in different tasks must serialise each call. In link mode every handle carries its own intermediate state, so several link-mode hashes can be in progress at the same time; in direct mode the intermediate state is held by the engine, so only one direct-mode hash can be in progress.

sec_hash_init¶

int sec_hash_init(sec_hash_handle_t *handle, uint8_t type);

Start a hash in link mode.

Same as sec_hash_init_ex() with SEC_HASH_MODE_LINK.

sec_hash_init_ex¶

int sec_hash_init_ex(sec_hash_handle_t *handle, sec_hash_mode_t mode, uint8_t type);

Start a hash in the given operation mode.

Clears the whole handle, then prepares the engine (direct mode) or the handle's link configuration (link mode) for type.

sec_hash_deinit¶

int sec_hash_deinit(sec_hash_handle_t *handle);

Erase the handle's data buffers.

Zeroes shaBuf and shaPadding through both their cacheable and non-cacheable addresses. The engine itself is not touched.

sec_hash_update¶

int sec_hash_update(sec_hash_handle_t *handle, const void *buffer, uint32_t size);

Add data to the hash.

The HAL cleans the data cache over buffer before the engine reads it, so the buffer may be cacheable.

sec_hash_finish¶

int sec_hash_finish(sec_hash_handle_t *handle, void *buffer);

Pad the message and read the digest.

回傳值：Digest length in bytes (20, 28, 32, 48 or 64) on success, or -1 if handle or buffer is NULL or the handle holds an invalid algorithm. Engine timeouts are not reported.

sec_hash_mode_t¶

Hash engine operation mode.

sec_hash_type¶

Hash algorithm, passed as the type argument of sec_hash_init().

sec_hash_handle_t¶

Hash handle for both direct and link mode.

The caller provides the storage. The HAL accesses the buffers the engine reads (shaBuf, shaPadding and the link configuration) through their non-cacheable aliases (hal_get_noncacheable_addr()) and performs the cache maintenance itself, so the handle may live in cacheable RAM. Buffer sizes fit SHA-512, the largest block size (128 bytes).

The running context stores pointers into the handle, so a handle must not be moved or copied with memcpy() while a hash is in progress.

巨集¶

hal_sec_dsa.h¶

#include "hal_sec_dsa.h"（原始碼）

RSA modular exponentiation, CRT signing and verification on the public-key accelerator (PKA).

Despite the dsa prefix these functions implement raw RSA: no padding scheme is applied or checked; the caller encodes and parses the padding.

Big numbers are unsigned integers stored as big-endian byte strings (most significant byte first) in 4-byte aligned uint32_t buffers. A number of size bits occupies size / 32 words. Supported operand sizes are 64, 128, 256, 512, 768, 1024, 1536 and 2048 bits; the RSA modulus can be up to 2048 bits.

Calls are blocking. The HAL takes no lock and the PKA is shared with the ECC functions (hal_sec_ecdsa.h, hal_sec_p256.h); serialise access with the other users. The SDK's mbedTLS hardware port takes ipro_sec_pka_mutex_take() / ipro_sec_pka_mutex_give() around its PKA calls.

sec_dsa_init¶

int sec_dsa_init(sec_dsa_handle_t *handle, uint32_t size);

Reset the PKA and initialise an RSA handle.

Resets the PKA, selects big-endian operand order and zeroes handle.

回傳值：0 (always).

sec_dsa_mexp_binary¶

int sec_dsa_mexp_binary(uint32_t size, const uint32_t *a, const uint32_t *b, const uint32_t *c, uint32_t *r);

Compute r = a^b mod c with square-and-multiply on the PKA.

The PKA must already be reset and in big-endian mode: call sec_dsa_init(), or Sec_Eng_PKA_Reset() followed by Sec_Eng_PKA_BigEndian_Enable().

回傳值：0 (always).

sec_dsa_mexp_mont¶

int sec_dsa_mexp_mont(uint32_t size, uint32_t *a, uint32_t *b, uint32_t *c, uint32_t *invR_c, uint32_t *primeN_c, uint32_t *r);

Compute r = a^b mod c with the PKA's Montgomery exponentiation.

The PKA must already be reset and in big-endian mode (see sec_dsa_mexp_binary()). With R = 2^size the caller supplies the Montgomery constants.

回傳值：0 (always).

sec_dsa_decrypt_crt¶

int sec_dsa_decrypt_crt(uint32_t size, uint32_t *c, sec_dsa_crt_cfg_t *crtCfg, uint32_t *d, uint32_t *r);

Compute r = c^d mod (p * q) with the Chinese remainder theorem.

Runs two sec_dsa_mexp_mont() exponentiations, modulo p and modulo q, and recombines them. The PKA must already be reset and in big-endian mode.

回傳值：0 (always).

sec_dsa_sign¶

int sec_dsa_sign(sec_dsa_handle_t *handle, const uint32_t *hash, uint32_t hashLenInWord, uint32_t *s);

Raw RSA signature s = hash^d mod n, computed with the CRT key.

Resets the PKA, places hash in the least significant words of a size / 2-bit zero buffer and runs sec_dsa_decrypt_crt() with handle->crtCfg.

回傳值：0 (always).

sec_dsa_verify¶

int sec_dsa_verify(sec_dsa_handle_t *handle, const uint32_t *hash, uint32_t hashLenInWord, const uint32_t *s);

Verify a raw RSA signature by computing s^e mod n.

Resets the PKA, computes s^e mod n with sec_dsa_mexp_binary() and compares the least significant hashLenInWord words of the result with hash. The remaining, more significant words (the padding) are not checked.

sec_dsa_crt_cfg_t¶

RSA private key in Chinese-remainder-theorem form.

Every value is a big-endian number of size / 2 bits, where size is the modulus length given to sec_dsa_init(). R denotes 2^(size / 2).

sec_dsa_handle_t¶

RSA key handle.

sec_dsa_init() zeroes the handle and sets size and crtSize; the caller then points the key fields at its own buffers.

hal_sec_ecdsa.h¶

#include "hal_sec_ecdsa.h"（原始碼）

ECDSA and ECDH on 256-bit curves using the public-key accelerator (PKA), plus direct access to the TRNG.

Scalars, coordinates, hashes and signature values are 256-bit unsigned integers stored as 32-byte big-endian byte strings (most significant byte first) in 4-byte aligned uint32_t[8] buffers.

Curve support: sec_ecdsa_get_public_key(), sec_ecdh_get_public_key() and sec_ecdh_get_encrypt_key() support both ECP_SECP256R1 and ECP_SECP256K1; sec_ecdsa_sign() and sec_ecdsa_verify() support ECP_SECP256R1 (NIST P-256) only.

Calls are blocking. The HAL takes no lock and the PKA is shared with the RSA functions (hal_sec_dsa.h) and hal_sec_p256.h; serialise access with the other users. The SDK's mbedTLS hardware port takes ipro_sec_pka_mutex_take() / ipro_sec_pka_mutex_give() around its PKA calls.

sec_ecdsa_init¶

int sec_ecdsa_init(sec_ecdsa_handle_t *handle, sec_ecp_type id);

Prepare the PKA and the TRNG for ECDSA on curve id.

Resets the PKA, selects big-endian operand order, enables the TRNG and stores id in the handle. The key pointers are left unchanged.

回傳值：0 (always).

sec_ecdsa_deinit¶

int sec_ecdsa_deinit(sec_ecdsa_handle_t *handle);

Reset the PKA after ECDSA use.

回傳值：0 (always).

sec_ecdsa_sign¶

int sec_ecdsa_sign(sec_ecdsa_handle_t *handle, const uint32_t *random_k, const uint32_t *hash, uint32_t hashLenInWord, uint32_t *r, uint32_t *s);

Create an ECDSA signature (r, s) on P-256.

Resets the PKA, computes R = k * G, r = R.x mod n and s = k^-1 * (hash + r * d) mod n with d = handle->privateKey. When r or s comes out as zero the computation is repeated, up to 100 times.

sec_ecdsa_verify¶

int sec_ecdsa_verify(sec_ecdsa_handle_t *handle, const uint32_t *hash, uint32_t hashLen, const uint32_t *r, const uint32_t *s);

Verify an ECDSA signature (r, s) on P-256.

Checks that r and s lie in [1, n - 1], computes R = (hash / s) * G + (r / s) * Q with Q = (publicKeyx, publicKeyy) and compares R.x mod n with r.

sec_ecdsa_get_private_key¶

int sec_ecdsa_get_private_key(sec_ecdsa_handle_t *handle, uint32_t *private_key);

Generate a random private key below the P-256 group order n.

Draws 32 bytes from the TRNG until the value is below n, up to 100 tries. The TRNG must be enabled (sec_ecdsa_init() does this).

sec_ecdsa_get_public_key¶

int sec_ecdsa_get_public_key(sec_ecdsa_handle_t *handle, const uint32_t *private_key, const uint32_t *pRx, const uint32_t *pRy);

Compute the public key Q = d * G on the handle's curve.

Same as sec_ecdh_get_public_key(). Resets the PKA first.

sec_ecdh_init¶

int sec_ecdh_init(sec_ecdh_handle_t *handle, sec_ecp_type id);

Prepare the PKA and the TRNG for ECDH on curve id.

Resets the PKA, selects big-endian operand order, enables the TRNG and stores id in the handle.

回傳值：0 (always).

sec_ecdh_deinit¶

int sec_ecdh_deinit(sec_ecdh_handle_t *handle);

Reset the PKA after ECDH use.

回傳值：0 (always).

sec_ecdh_get_encrypt_key¶

int sec_ecdh_get_encrypt_key(sec_ecdh_handle_t *handle, const uint32_t *pkX, const uint32_t *pkY, const uint32_t *private_key, const uint32_t *pRx, const uint32_t *pRy);

Compute the ECDH shared point S = d * P for a peer public key P.

The shared secret is S.x (pRx). Resets the PKA first.

sec_ecdh_get_public_key¶

int sec_ecdh_get_public_key(sec_ecdh_handle_t *handle, const uint32_t *private_key, const uint32_t *pRx, const uint32_t *pRy);

Compute the public key Q = d * G on the handle's curve.

Resets the PKA first.

sec_ecc_get_random_value¶

int sec_ecc_get_random_value(uint32_t *randomData, uint32_t *maxRef, uint32_t size);

Fill a buffer with TRNG output, optionally below an upper bound.

Reads size bytes from the TRNG. With maxRef set, the draw is repeated (up to 100 times) until the value, read as a big-endian number, is below maxRef. The TRNG must be enabled.

sec_eng_trng_enable¶

int sec_eng_trng_enable(void);

Enable the TRNG and wait for its first output.

Busy-waits with a bounded poll count. Unlike hal_sec_trng_init() it does not set the ring-oscillator selection.

sec_eng_trng_disable¶

void sec_eng_trng_disable(void);

Disable the TRNG.

sec_eng_trng_read¶

int sec_eng_trng_read(uint8_t data[32]);

Read one 32-byte block from the TRNG.

Triggers a generation, busy-waits for it and copies the result. The TRNG must be enabled. This bypasses the buffering of hal_sec_trng.h.

sec_ecp_type¶

Elliptic curve identifier.

sec_ecdsa_handle_t¶

ECDSA key handle.

The key fields point at caller-owned 32-byte buffers; set the ones the operation needs after sec_ecdsa_init().

sec_ecdh_handle_t¶

ECDH handle.

hal_sec_p256.h¶

#include "hal_sec_p256.h"（原始碼）

NIST P-256 point doubling and mixed addition on the public-key accelerator (PKA), as building blocks for a scalar multiplication.

These functions are a field-arithmetic back end for a caller that implements the scalar multiplication itself (for example an mbedTLS ECP accelerator hook); they are not stand-alone ECDH or signing functions. The caller owns the PKA lock, validates the curve and the input points, and keeps scalar blinding and randomisation. No private scalar passes through this interface, but coordinates may still be sensitive.

Call sequence: sec_p256_field_init(), any number of sec_p256_double() and sec_p256_add_mixed() calls, sec_p256_field_free(). The field operations follow a fixed schedule without branches on scalar bits.

Built for IPRO7 only.

sec_p256_field_init¶

void sec_p256_field_init(void);

Reset the PKA and load the P-256 field constants.

Selects big-endian operand order and loads p, -p^-1 mod 2^256, 1 and 2^512 mod p into PKA registers. Call it once, with the PKA lock held, before sec_p256_double() or sec_p256_add_mixed().

sec_p256_field_free¶

void sec_p256_field_free(void);

Clear the PKA registers used by the field back end and reset the PKA.

Call it when the scalar multiplication is finished, before releasing the PKA lock.

sec_p256_double¶

void sec_p256_double(sec_p256_point_t *r, const sec_p256_point_t *p);

Compute r = 2 * p in Jacobian coordinates (curve parameter a = -3).

sec_p256_add_mixed¶

void sec_p256_add_mixed(sec_p256_point_t *r, const sec_p256_point_t *p, const sec_p256_point_t *q);

Compute r = p + q, with q in affine coordinates.

Only q.x and q.y are read; q.z is ignored and q must not be the point at infinity. Special cases: if p is the point at infinity (p.z = 0), q is copied to r unchanged; if p = q the result is 2 * p; if p = -q the result is the point at infinity, returned as (1, 1, 0).

sec_p256_point_t¶

P-256 point in Jacobian coordinates.

Each coordinate is a 32-byte big-endian integer in [0, p) stored in a 4-byte aligned array. The affine point is x = X / Z^2, y = Y / Z^3; Z = 0 is the point at infinity.

hal_sec_trng.h¶

#include "hal_sec_trng.h"（原始碼）

Random numbers from the security engine's true random number generator (TRNG), and ring-oscillator frequency measurement.

Call hal_sec_trng_init() (or hal_sec_common_init()) once before reading random data. The TRNG delivers 32-byte blocks; the HAL buffers one block and hands it out in pieces. If a block read times out or returns all zeros (for example after a low-power state powered the engine down), the HAL re-initialises the TRNG once and retries.

The read functions run inside hal_sec_enter_critical() (see hal_sec_common.h) and busy-wait on the engine. In FreeRTOS builds they must therefore be called from task context, not from an interrupt handler.

Compiled into the HAL for FreeRTOS and Zephyr builds only.

hal_rand_stream¶

int hal_rand_stream(uint8_t *buf, int len);

Fill a buffer with random bytes.

hal_rand¶

int hal_rand(void);

Return a random int.

Reads sizeof(int) bytes with hal_rand_stream(); errors are not reported.

回傳值：Random value (any bit pattern, including negative values).

hal_sec_get_random_word¶

uint32_t hal_sec_get_random_word(void);

Return a random 32-bit word.

Reads 4 bytes with hal_rand_stream(); errors are not reported.

回傳值：Random value.

hal_sec_trng_init¶

int hal_sec_trng_init(void);

Initialise the TRNG.

On IPRO7 this first selects the ring oscillators that feed the entropy source, then enables the TRNG, which busy-waits for its first generation. The internal buffer is marked empty so that the next read fetches a fresh block. Calling it again re-initialises the TRNG.

回傳值：0 (always; a TRNG enable timeout is not reported).

hal_rosc_measure¶

uint32_t hal_rosc_measure(uint8_t rosc_idx, uint16_t *t_cnt, uint16_t *g_cnt);

Measure the frequency of one of the TRNG ring oscillators.

Counts the selected ring oscillator against the 32 MHz crystal with the security engine's clock detector and returns 32 MHz * t_count / (g_count + 1). Intended for production test. Available on IPRO7 only.

回傳值：Frequency in Hz, or 0 if rosc_idx is above 3 or the reference count is 0.